Amabhawodi e-SAE J429 Ibanga lesi-5 Hex
Incazelo emfushane:
I-SAE J429 Grade 5 Hex Bolts Hex Cap Screws Standard: ASME B18.2.1 izinhlobo ezahlukene zekhanda ziyatholakala Usayizi Womucu: 1/4”-1.1/2” anobude obuhlukahlukene IBanga: SAE J429 Ibanga lesi-5 Qeda: I-Black Oxide, iZinc Plated, I-Hot Dip Galvanized, i-Dacromet, njalonjalo Ukupakisha: Inqwaba mayelana ne-25 kgs ibhokisi ngalinye, 36 amabhokisi Iphalethi ngalinye Inzuzo: Ikhwalithi Ephezulu kanye Nokulawulwa Kwekhwalithi Eqinile, Intengo Encintisanayo, Ukulethwa Ngesikhathi; Ukusekelwa Kobuchwepheshe, Imibiko Yokuhlolwa Kokunikezela Sicela ukhululeke ukuxhumana nathi ukuze uthole imininingwane eyengeziwe. I-SAE J429 SAE J...
Imininingwane Yomkhiqizo
Omaka bomkhiqizo
I-SAE J429Ibanga lesi-5 le-Hex BoltsIzikulufa ze-Hex Cap
Okujwayelekile: ASME B18.2.1 izinhlobo ezahlukene zekhanda ziyatholakala
Usayizi Womucu: 1/4”-1.1/2” ngobude obuhlukahlukene
Ibanga: SAE J429 Ibanga lesi-5
Qeda: I-Black oxide, i-Zinc Plated, i-Hot Dip Galvanized, i-Dacromet, njalonjalo
Ukupakisha: Inqwaba engaba ngu-25 kgs ibhokisi ngalinye, amabhokisi angama-36 iphalethi ngalinye
Inzuzo: Ikhwalithi Ephezulu kanye Nokulawulwa Kwekhwalithi Eqinile, Intengo Encintisanayo, Ukulethwa Ngesikhathi; Ukusekelwa Kobuchwepheshe, Imibiko Yokuhlolwa Kokunikezela
Sicela ukhululeke ukuxhumana nathi ukuze uthole imininingwane eyengeziwe.
I-SAE J429
I-SAE J429 ihlanganisa izidingo zomshini nezinto ezibonakalayo zezixhumi zochungechunge lwamayintshi asetshenziswa ezimbonini zezimoto nezihlobene ngosayizi ukuya ku-1-1/2” kuhlanganisa.
Ngezansi isifinyezo esiyisisekelo samabanga avame kakhulu. I-SAE J429 ihlanganisa inani lamanye amabanga nokuhluka kwebanga okungafakwanga kulesi sifinyezo, okuhlanganisa no-4, 5.1, 5.2, 8.1, kanye no-8.2.
I-J429 Mechanical Properties
| Ibanga | Usayizi Wokuzisholo, amayintshi | Ukulayisha Usayizi Ogcwele, psi | Isivuno Amandla, min, psi | Amandla Okuqina, min, psi | Elong, min, % | RA, iminithi, % | Core Hardness, Rockwell | I-Tempering Temperature, min |
|---|---|---|---|---|---|---|---|---|
| 1 | 1/4 kuye ku-1-1/2 | 33,000 | 36,000 | 60,000 | 18 | 35 | B7 kuya ku-B100 | N/A |
| 2 | 1/4 kuye ku-3/4 | 55,000 | 57,000 | 74,000 | 18 | 35 | B80 kuya ku-B100 | N/A |
| Ngaphezulu kwe-3/4 kuye ku-1-1/2 | 33,000 | 36,000 | 60,000 | 18 | 35 | B70 kuya ku-B100 | ||
| 5 | 1/4 kuye ku-1 | 85,000 | 92,000 | 120,000 | 14 | 35 | C25 ukuze C34 | 800F |
| Ngaphezu kwe-1 ukuya ku-1-1/2 | 74,000 | 81,000 | 105,000 | 14 | 35 | C19 ukuze C30 | ||
| 8 | 1/4 kuye ku-1-1/2 | 120,000 | 130,000 | 150,000 | 12 | 35 | C33 ukuze C39 | 800F |
| Izidingo zeBanga lesi-2 zosayizi 1/4″ ukuya ku-3/4″ zisebenza kuphela kumabhawodi angu-6″ nafushane, kanye nezigxivizo zabo bonke ubude. Kumabhawudi amade kuno-6″, izimfuneko zeBanga loku-1 zizosebenza. | ||||||||
Izidingo Zamakhemikhali ze-J429
| Ibanga | Okubalulekile | Ikhabhoni, % | Phosphorus,% | Isibabule, % | Ukumaka Ibanga |
|---|---|---|---|---|---|
| 1 | Insimbi Yekhabhoni Ephansi noma Emaphakathi | 0.55 ubuningi | 0.030 ubuningi | 0.050 ubuningi | Lutho |
| 2 | Insimbi Yekhabhoni Ephansi noma Emaphakathi | 0.15 - 0.55 | 0.030 ubuningi | 0.050 ubuningi | Lutho |
| 5 | Insimbi Yekhabhoni Emaphakathi | 0.28 – 0.55 | 0.030 ubuningi | 0.050 ubuningi |  |
| 8 | Medium Carbon Alloy Steel | 0.28 – 0.55 | 0.030 ubuningi | 0.050 ubuningi |  |
I-Hardware Enconyiwe ye-J429
| Amantongomane | Amawasha |
|---|---|
| J995 | N/A |
Amabanga Ahlukile
Ezixhunyweni ezinkulu kuno-1-1/2″ ngobubanzi, amabanga alandelayo e-ASTM kufanele acatshangelwe.
| Ibanga le-SAE J429 | Ukulingana kwe-ASTM |
|---|---|
| Ibanga loku-1 | A307 Amabanga A noma B |
| Ibanga lesi-2 | A307 Amabanga A noma B |
| Ibanga lesi-5 | A449 |
| Ibanga lesi-8 | A354 Ibanga BD |
| Leli shadi liqhathanisa ukucaciswa kwe-SAE kanye ne-ASTM okufanayo kodwa okungafani ngobubanzi ukuya ku-1½”. | |
Ilebhu yokuhlola
Indawo yokusebenzela
Inqolobane
