Wholesale Dealers of ASTM A194 4 Heavy Hex Nuts for Portland Manufacturers
Short Description:
ASTM A194/A194M 4 Heavy Hex Nuts API 6A Flange Valve Wellhead Heavy Hex Nuts Dimension Standard: ASME B18.2.2, ASME B18.2.4.6M, ISO 4033, Din934 H=D Inch Size: 1/4”-4” with various lengths Metric Size: M6-M100 with various lengths Other Available Grade: ASTM A194/A194M 2H, 2HM, 4, 4L, 7, 7L, 7M, 8, 8M, 16 and so on. Finish: Plain, Black Oxide, Zinc Plated, Zinc Nickel Plated, Cadmium Plated, PTFE etc. Packing: Bulk about 25 kgs each carton, 36 cartons each pallet Advantage: High Quality, Comp...
Product Detail
Product Tags
Wholesale Dealers of ASTM A194 4 Heavy Hex Nuts for Portland Manufacturers Detail:
ASTM A194/A194M 4 Heavy Hex Nuts
API 6A Flange Valve Wellhead Heavy Hex Nuts
Dimension Standard: ASME B18.2.2, ASME B18.2.4.6M, ISO 4033, Din934 H=D
Inch Size: 1/4”-4” with various lengths
Metric Size: M6-M100 with various lengths
Other Available Grade:
ASTM A194/A194M 2H, 2HM, 4, 4L, 7, 7L, 7M, 8, 8M, 16 and so on.
Finish: Plain, Black Oxide, Zinc Plated, Zinc Nickel Plated, Cadmium Plated, PTFE etc.
Packing: Bulk about 25 kgs each carton, 36 cartons each pallet
Advantage: High Quality, Competitive Price, Timely Delivery,Technical Support, Supply Test Reports
Please feel free to contact us for more details.
Product detail pictures:
We generally believe that one's character decides products' top quality, the details decides products' high-quality ,along with the REALISTIC,EFFICIENT AND INNOVATIVE team spirit for Wholesale Dealers of ASTM A194 4 Heavy Hex Nuts for Portland Manufacturers, The product will supply to all over the world, such as: Mexico, Norway, Bolivia, Our products are sold to the Middle East, Southeast Asia, Africa, Europe, America and other regions, and are favorably appraised by clients. To benefit from our strong OEM/ODM capabilities and considerate services, please contact us today. We will sincerely create and share success with all clients.
Build at your own risk. I would say this is hard to do and needs a helper. Using a 79cc. Predator engine from “Harbor Freight” a hardware store.
Also a couple of funny things.
The engine seems to be mounted backwards.
The exhaust points right at your legs.
The on/off switch is on the front of the engine away from you.
The pulls start, pulls to the front of the snow blower instead of to the back. (where you are)
The air cleaner is in back away from flying snow, that’s good.
All the controls are on the engine.
Some assembly tips…
Use the engine mounting plate that came with it.
The handle bar can be removed to easier install the new engine. The bottom handle bar bolt, engine side, will hit the engine case. Use a shorter bolt or cut the original one shorter.
The snow thrower drive pulley is two pieces and needs a engine shaft spacer to push them together. Use the one that came off the engine shaft first, to hit the engine drive shaft taper and a 3/4 copper pipe coupling or steel pipe. The copper pipe coupling or better, steel pipe will have to be cut or grind down to approximate length of 1 1/2 inches, to have a exact pulley alignment. Also apply permanent thread lock, the red stuff, to the shaft bolt.
The new engine will mount to the per-made holes in the snow thrower body but a motor brace is needed under the engine and four holes will need to be drilled into the body sides. Angle iron will make the bracket. Also apply permanent thread lock to the four engine mounting bolts when installing the engine.
The wheels have to come off to drill holes in the side of the snow thrower body. Twist off the axle flat star lock washer with pliers and you could reuse them.
Parts you will need…
3/4 copper pipe coupling or steel pipe to be used on the engine shaft as a pulley spacer cut to a exact length.
1 1/2” X 1 1/2” X 3 feet 14 gauge, Plated Steel Slotted Angle Iron
BOLTS TO MOUNT THE ENGINE
5/16”-24 X 3/4” Grade 5 SAE Hex Cap Screws (4)
5/16”-24 Hex Nuts (4)
5/16” Split Lock Washers (4)
BOLTS TO MOUNT THE ANGLE IRON BRACE
AND ENGINE TO BRACE
5/16”-18 X 3/4” Grade 5 USS Hex Cap Screws (8)
5/16”-18 Hex Nuts (8)
5/16” Split Lock Washers (8)
High speed metal and stud roll forming machine. It uses gearbox as transmission method. For protecting machine, it uses water cooling down system to make machine cool.
