TRITIUM ELECTRONICS
SUPERB HIGH END TURNTABLES, INTERCONNECTS, TRIPHAZERS
SEE WWW.BEERCITYAUDIO.COM FOR DETAILS
https://www.mediafire.com/?bge14488efm81 COOL SONGS
WATCH IT TO THE RUN OUT GROOVE..
WWW.BEERCITYAUDIO.COM
TRITIUM AIR BEARING ULTIMATE VISCOUS DAMPED TONEARM & TURNTABLE.
Viscous damped in the vertical as well as horizontal plane.
Damping takes place at the headshell for maximum control.
Undamped tonearms have a very colored presentation from vibrations set up by the needle.
Their sound is far from what is possible from the Vinyl LP format.
Undamped or rear damped tonearms are not even close in terms of fidelity, tracking and Vinyl wear.
The Tritium Tonearm is a perfected design for Medium to High compliance cartridges and gives about a 10 to 12 hertz tonearm resonance frequency.
Tonearm weighs about 34 Grams with this 8 gram cartridge and has a 10 hertz arm resonance frequency.
We have a Sumiko Blue Point Special cartridge with over 5,000 playing hours on it and a Shelter with 3,800 hours!
With no visible wear under a 700 power Stereo microscope
AMAZING… !
Lowest Mass, Lowest Wear, Highest trackability, Highest compliance tonearm in the world.
( OTF VTA ) ON THE FLY Vertical Tracking Adjustment is a screw found on top of the Tonearm pivot.
-COMPLETELY FRICTIONLESS for the MOST ACCURATE LP PLAYBACK EVER-
NO pivoted or linear arm design available can compare!
33 RPM, 45 RPM and Optional 78 RPM
Tritium Air Bearing Turntable
OWN THE ULTIMATE TURNTABLE!
The culmination of 30 years of research and development results in this superbly designed turntable for a lifetime of musical pleasure! Comprised of the ultimate precision machining unmatched in performance.
TONE ARM ASSEMBLY:
- The lightest, strongest, least resonant and most accurate tracking pickup arm ever made.
- Tone arm moves effortlessly in horizontal and vertical directions with 5 to 12 PSI of compressed air and is damped by a Synthetic viscous fluid.
- It is COMPLETELY FRICTIONLESS!
PLATTER ASSEMBLY:
- Precision designed to damp out disruptive energy!
- Platter has a layer each of Aluminum and Brass with a Copper top platter mat.
- Suspended on a Brass/Bronze ball bearing and nylon thrust pad for smooth operation.
- Rotor is designed with a .017″ slope to remove record warps and virtually eliminate all subsonic wow.
PLINTH (BASE) ASSEMBLY:
- 2-piece base comprised of 70 lb 1.2″ Aluminium plates.
- Layer of ISO-DAMP compound between the layers to dampen and absorb incoming and outgoing vibrations to very low levels.
- Plinth rests on 4 adjustable brass leveling Tip Toes.
MOTOR:
- Pulley is precision machined for accurate 33 or 45 RPM playback.
- The High Torque Aluminum motor with a brass base.
- Alinco 48 pole, Synchronous hysteresis, 115 VAC, 600 rpm, 1/150 HP. Motor
Included:
- Polished Brass and Copper Record Weight with a nylon insert for quiet spindle touchdown.
- Phono Output Connector Box is a machined aluminum billet with gold RCA connectors and a ground connector.
- High torque belt drive.
- Tritium logo on plinth.
- Quiet Gast air pump, Surge tank, 100 feet air tubing
-Aluminum Table with adjustable feet
TRITIUM AIR BEARING TURNTABLE COPYRIGHT (C) (P) 2000-2014 WWW.BEERCITYAUDIO.COM
Post time: Jun-12-2017