As part of the design development procedure used to develop a crash energy management coach car crush zone, the following steps are followed: conduct a detailed review of current state-of-the-art designs in use around the world, draft the design, conduct a series of tests on full-scale sub-assemblies, and then modify or finalize the design based upon the results from the tests. An example of one full-scale sub-assembly test is shown in this video. The test was performed at a drop tower facility where the impacting mass was dropped from various heights to obtain defined impact energies. This test was conducted to develop information about the performance of the fixed/sliding sill shear bolt arrangement for triggering the push-back sliding sill into the fixed sill. Several views from a high speed camera show the progression of shear bolt failure and appropriate sliding sill push-back into the fixed sill.
Volpe: Advancing transportation innovation for the public good. Get to know us at https://www.volpe.dot.gov/
Post time: Jun-02-2018