Top Quality Track Shoe Bolts with Nuts to Vietnam Factory
Short Description:
Professional manufacturer of Plow bolts, feature a flat or dome countersunk head design, with a square neck to prevent turning when the nut is tightened or removed. They are used in Excavator, wheel loader, bulldozer, backhoe loader blades & cutting edges. Fit for Caterpillar, Volvo, Doosan, Komatsu, Komelco, Ajax, JCB, BYG Inch Size: 3/8”-1.3/8” with various lengths Metric Size: M10-M36 with various lengths Grade: SAE J429 Grade 5, 8; 170 KSI, 180 KSI; ISO 898-1 class 8.8, 10.9, 12.9 F...
Product Detail
Product Tags
Top Quality Track Shoe Bolts with Nuts to Vietnam Factory Detail:
Professional manufacturer of Plow bolts, feature a flat or dome countersunk head design, with a square neck to prevent turning when the nut is tightened or removed. They are used in Excavator, wheel loader, bulldozer, backhoe loader blades & cutting edges.
Fit for Caterpillar, Volvo, Doosan, Komatsu, Komelco, Ajax, JCB, BYG
Inch Size: 3/8”-1.3/8” with various lengths
Metric Size: M10-M36 with various lengths
Grade: SAE J429 Grade 5, 8; 170 KSI, 180 KSI; ISO 898-1 class 8.8, 10.9, 12.9
Finish: Plain, Black Oxide, Zinc Plated, and so on
Packing: Bulk about 25 kgs each carton, 36 cartons each pallet
Advantage: High Quality and Strict Quality Control, Competitive Price,Timely Delivery; Technical Support, Supply Test Reports
Please feel free to contact us for more details.
Product detail pictures:
Our personnel are generally in the spirit of continuous improvement and excellence, and together with the outstanding top quality merchandise, favorable price tag and fantastic after-sales solutions, we try to gain every single customer's rely on for Top Quality Track Shoe Bolts with Nuts to Vietnam Factory, The product will supply to all over the world, such as: El Salvador, Riyadh, Japan, We have our own registered brand and our company is developing rapidly owing to high quality products, competitive price and excellent service. We sincerely hope to establish business relations with more friends from home and abroad in the near future. We look forward to your correspondence.
In this video I give a demonstration of the Calog Loadcell II PCN calibrator / tester.
Calog instruments manufactured by Instrotech, a Comtest Group company:
https://www.instrotech.co.za/ and https://www.comtest.co.za/
https://www.calogcalibrators.co.za/calog_loadcell_calibrator.htm
Features of the CALOG Calibrators – Loadcell II Calibrator
* Portable Loadcell fault finder
* No need to disconnect loadcell — you can do it in situ (onsite)
* Insulation of the loadcell to check for water ingress. Normally measured at 50VDC this is the minimum resistance between the metal body of the load cell and any of its electrical connections.
* Simulate Load output to controller
* Local designed product – Made in South Africa
* SD card for storing / data logging results
* Ruggered
* Loadcell display – LCII will excite the laodcell and measure the output
The CALOG Calibrators – Loadcell II Calibrator is ideal for testing 4 and 6 wire loadcells, checking insulation breakdown, weighing system calibration and simulation.
It can test a loadcells’ zero balance, input resistance, output resistance, bridge balance, 50V DC insulation test from bridge to shield, bridge to housing and shield to housing.
The CALOG Calibrators – Loadcell II Calibrator is a hand-held precision calibrator specifically designed for load cell testing, including insulation breakdown and weighing system calibration or simulation. Simply connect a strain-guage load cell to the spring terminals and press “TEST LOADCELL”. The backlit graphics will display four or six wire, zero balance, input or output resistance and bridge balance. It can then carry out a 50 VDC insulation test form bridge to shield, bridge to housing and shield to housing.
For system testing and calibration the CALOG Calibrators – Loadcell II Calibrator can simultaneously measure mV (with mass display), excitation voltage and mA. In source mode, used for load cell amplifier pre-calibration testing, it can source mV (with mass display), measure excitation and measure mA. In simulate mode it sources a mA signal to the control room or SCADA. The display can be in mA, mA and mass or mass and mA.
* Measure, source and simulate 0 to 24 mA with 1uA resolution
* Measure 0 to 20 V with 1mV resolution
* Measure -4.5 to 35 mV with 1uV resolution
* Measure mV, mV & Mass or Mass & mV
* Source mV, mV & Mass or Mass & mV
* Simulate mA, mA & Mass or Mass & mA
* Built-in 24V power supply for mA loops
* 1 year guarantee (batteries not included)
* Carry case, protective rubber boot, charger and test leads supplied as standard
Other items, terms and topics covered / mentioned in this video:
* 4-20mA process loop, SCADA, PLC
* Accurate voltage (mV) and current (mA) multimeter reference.
* VISHAY – Revere Transducers – High accuracy load cell – type 9363
* Excitation voltage
* Critical manufacturing environments
* temperature transducers, current transducers, voltage transducers, flow control, level measurement
* Process control transmitter
* Process control system
* Process control actuator
website:https://www.jhmindustry.com/
Shanghai Jian & Mei Industry and Trade Co., Ltd. is the company which manufacture and export fasteners and metal hardware, founded in 2006, with import-export authority. Now, 80% products export to all over the world and 20% sell in domestic market.
