Short Lead Time for DIN 74361-H Flat Collar Nuts Wheel Nuts with Washers to Nepal Factories

Only complete Combination Aluminum/Steel Dent Repair System Available! This combination unit allows you to address all of your steel repairs and be ready for the aluminum repairs when they arrive.

• Works on all dent repairs on all vehicles
• Paint on repairs – use the heavy duty steal glue pulling system
• Paint off repairs – the combo stud welder will weld both steel and aluminum

Kit Includes:
• Combination Aluminum/Steel stud welder
• 4mm aluminum welding studs
• 6mm aluminum welding studs
• 4mm pulling adapters
• 6mm pulling adapters
• 2.2mm Uni-Studs
• 2.6mm Uni-Studs
• Straight Uni-Tabs
• Twisted Uni-Tabs
• Welding tips to weld aluminum & steel pulling attachments
• Uni-Tab welding tip
• 10″, 14″ & 18″ pulling rods
• Deluxe “T” handle slide hammer
• Stud Buddy
• ½ lb. Uni-Wire
• Uni-Wire welding tip
• Slide hammer for Uni-Wire
• Heavy weight glue tabs for large damage repair
• Heavy weight glue
• Glue gun
• Uni-Vac suction slide hammer
• Quick Puller for single studs
• 34″ pulling bridge w/ 1 puller
• 49″ pulling bridge w/ 2 pullers

Features:

• Heavy duty steel constructed bench station with caster wheels
• Combination aluminum/steel welder with individual cables, welding tips & adapter collets
• 208-230 volts single phase and standard 50 amp plug

Ships directly from the manufacturer via truck. Workstation will ship approximately 14 days after order is placed.

Made in Canada

Click the link below to shop now:

https://www.collisionservices.com/ShowProduct.aspx?ID=5357

Mike Kraft gives tips on garage door maintenance. There are three key steps: cleaning, safety and lubricating. Find the detailed instructions here: https://low.es/1Sie7Ma

Start outside, cleaning the outside of your door with a soft sponge or cloth. You should do this once a year or potentially more if you live in a soft air climate. Once it is washed, just rinse with a hose. If the garage door is made of wood, inspect the door to see if it needs to be repainted or stained.

It’s also good to do a safety check every few months or so. Keep in mind torsion springs can cause injuries. If your door uses extension springs, you can find replacements at your local Lowe’s.

When doing safety checks, remove any cars or debris from the garage door area or tracks. Then do a visual inspection of all the cables, rollers, springs and hinges. Replace anything is frayed or worn and tighten bolts. For bolts that are near a safety tag or painted red, only have a trained technician adjust.

Also check the door balance, disconnecting the power first to the opener. Then disengage the door from the opener and raise the door to waist level. Release slowly. If the door raises or lowers, a trained technician will need to adjust the balance.

Use a non-silicone based lubricant to lubricate hinges, springs and bearings. Don’t oil the tracks, or else the door might become unbalanced.

If your door needs some repair, look at your owner’s manual or visit your local Lowe’s for a garage door professional installation.

To find more helpful how-to videos like this, visit Lowes.com/Videos. Also, find garage doors and openers here: https://www.lowes.com/pl_Garage+Doors++Openers_4294858065_4294937087_