professional factory provide DIN913 DIN914 DIN915 DIN916 DIN551 Set Screws Supply to Bangladesh

The Problem

Carbon rich recirculated exhaust gasses leave deposits within the EGR valve which restrict or damage the EGR valve causing vehicle faults.

The EGR valve on these vehicles is designed to redirect a portion of the vehicles exhaust gases back to the engine through the intake manifold. Carbon rich recirculated exhaust gasses enter the EGR valve before the intake manifold, over time Carbon deposits gather in the EGR valve and can interfere with the operation of the EGR valve flap and can block air flow. Resulting in reduced fuel economy and vehicle performance. Often this build up damages the EGR valves which are expensive to replace. This malfunction of the valve or blocking of the exhaust port causes Detonation (also known as pinging or spark knock) causing misfiring or rough idle. Many examples can be found across the internet showing these EGRs completely blocked up with carbon; significantly reducing airflow to the intake.

Symptoms of the fault

Rough engine running

Misfiring

Decreased throttle response

Loss of power or torque

Smokey engine

Low MPG / decreased MPG

Vehicle stalling at low speeds

Acceleration slow / sluggish

Vehicles affected and compatibility

BMW engines M47 M47N M57 M47N2 M67 M47R

3 series E46

318d 2001-2005

318td 2002-2004

320d 1997- 2005

320cd 2003- 2006

320td 2000-2004

330d 1998-2003

330xd 2000-2003

5 series E39

520d 1999-2003

525d 1999-2003

530d 1997-2003

X5 E53

3.0d 2000-2003

X3 E83

2.0d 2003-2006

E38 7 Series

730d 1997-2001

740d 1998-2001

E65 7 Series

740d 2001-2005

Rover 75 MG ZT 2001-2005

Land Rover Freelander TD4 2001-2006

Land Rover Range Rover TD6 2002-2006

This item is not compatible with quick release style hoses.

Vehicles which utilise a vacuum operated EGR will not show a fault code when replaced with our EGR blank. Vehicles with an electronically operated EGR will show a fault code which will need to be mapped out. This is the same for all suppliers of EGR blanks whether stated or not.

This item is for diesel vehicles only not for petrol vehicles.

Associated part numbers:

11717785452, 11717804378, 7785452, 7804378, 11717793484, LR005791, WAV000040, 7.28138.00.0, 7.28138.02.0, 7.28264.00.0, 7.28264.06.0, 555229, 14406, 14433, EGR251, EGR258, ERV190, ERV208, Pierburg.

Part numbers are for guidance only, please inspect your EGR to ensure you are purchasing the correct blank.

Our solution

Our kit allows easy replacement of the EGR valve with our improved design part which stops any recirculated exhaust gases entering the intake manifold. Resolving vehicle faults and stopping carbon build ups in future.

Install our completely Stainless Steel EGR blank and eliminate build up in the intake manifold. This allows the engine to breath better which can improve vehicle performance and fuel efficiency. Our EGR blanking kit stops these recirculated exhaust gases entering the intake manifold, eliminating the risk of future build ups.

Our kit is the most comprehensive available including all components required to delete the EGR valve and will fit in the same way as the OEM part. You will receive:

1x Stainless steel EGR tube, precision machined and all constructed from stainless steel, featuring a substantial bead to ensure an air tight seal with the intercooler hose.

4x Stainless steel EGR to intake manifold bolts.

1x Intake manifold to EGR rubber gasket.

1X vacuum pipe blanking plug with cable tie to secure.

2x Stainless steel EGR cooler blanks to allow you to blank off the EGR cooler if installed on your vehicle.

1X Exhaust manifold blank with Cemjo high temperature gasket and fasteners allowing you to remove the EGR to Exhaust manifold flexible tube that often blocks or splits.

Our kit is top of the range and the most comprehensive kit available. Check out our instructions and video to see how our kit allows you to successfully eliminate the EGR valve on your vehicle.

Possible advantages of EGR deleting:

Turbo can spool up quicker and at lower revs resulting in less turbo lag.

Prevents carbon build-up inside intake manifold and ports.

Smoother pick up from idle, engine running and better fuel economy.

Increases in power and / or torque which slowly fades as carbon builds up.

Improved fuel consumption / MPG.

You will receive

1x Stainless steel EGR delete tube

4x Stainless steel EGR delete tube mounting bolts

1x Stainless steel exhaust manifold to egr pipe blank

1x High temp CEMJO exhaust manifold blank gasket

2X Exhaust manifold blank bolts with locking washers

2X Stainless steel EGR cooler blanking plates

1X Intake manifold to EGR gasket

1X Vacuum tube plug with cable tie