Professional Design EN 14399-3 and 7 Structural Bolt Set for Proloading for Eindhoven Factories
Short Description:
BS EN 14399-3 and 7 System HR Structural Bolt Set for Preloading DIN EN 14399-3 and 7 System HR Structural Bolt Set for Preloading Thread Size: M12-M36 with various length Grade: Bolt-10.9/8.8, Nut-10/8, Washer-300~370HV Finish: Black Oxide, Zinc Plating, Hot Dip Galvanized, Dacromet, and so on Packing: Bulk about 25 kgs each carton, 36 cartons each pallet Advantage: High Quality and Strict Quality Control, Competitive price,Timely delivery; Technical support, Supply Test Reports Please feel ...
Product Detail
Product Tags
Professional Design EN 14399-3 and 7 Structural Bolt Set for Proloading for Eindhoven Factories Detail:
BS EN 14399-3 and 7 System HR Structural Bolt Set for Preloading
DIN EN 14399-3 and 7 System HR Structural Bolt Set for Preloading
Thread Size: M12-M36 with various length
Grade: Bolt-10.9/8.8, Nut-10/8, Washer-300~370HV
Finish: Black Oxide, Zinc Plating, Hot Dip Galvanized, Dacromet, and so on
Packing: Bulk about 25 kgs each carton, 36 cartons each pallet
Advantage: High Quality and Strict Quality Control, Competitive price,Timely delivery; Technical support, Supply Test Reports
Please feel free to contact us for more details.
Product detail pictures:
Our merchandise are broadly identified and trusted by end users and can satisfy continually developing economic and social requires for Professional Design EN 14399-3 and 7 Structural Bolt Set for Proloading for Eindhoven Factories, The product will supply to all over the world, such as: Oman, Angola, Hongkong, Now, we are trying to enter new markets where we do not have a presence and developing the markets we have now the already penetrated. On account of superior quality and competitive price , we'll be the market leader, be sure to don??￥t hesitate to contact us by phone or email, if you are interested in any of our solutions.
FYH ORIGINAL SET SCREW
Time lapse of 3D printed “BIG Nut And Bolt”. Time lapse taken from my Octoprint server attached to my Printrbot Simple Makers 1405 using the standard Raspberry Pi camera and a wide angle clip on lens.
A very cool print to make and great to show off to people. Very satisfying to spin the nut on and off! Had to screw it on and off a couple of times to loosen up the thread so it was smooth – could also put some silicone sealant on it to make it even more smooth, but it doesn’t need it.
Scaled it down to about 60% for it to fit into my printer upright. Would love to print this full size or bigger as a great novelty item and showcase as to what can be 3D printed.
An oddity of the design from an engineers point of view if this was a functional piece is that the nut has a different size hex to the bolt head, so you would need two different spanners to fasten this nut and bolt, or a pair of adjustable one?!
Original model is by be3D_printers and can be found here – https://www.thingiverse.com/thing:387266.
My make can be found here – https://www.thingiverse.com/make:222068
Print Settings Below:
Filament: Printed using 3D Prima 1.75 PLA – Dark Grey
Filament used: 10.844m 32.0g
Layer Height: 0.2064mm
Temperature: 210°C
Perimeters: 2 at 0.4mm (0.8mm total)
Infill: 25%
Raft: No
Brim: No
Support: None
Speed: 20mm/s
Time: About 4 hour
Scale: 60%
Still trying to get a better set up for my time lapses. Think the built in Raspberry Pi camera is not suited and I may have to set up an external camera – comment below if you have any tips or suggestions?!
Any questions or queries please feel free to comment. Please subscribe for more 3D printing videos.
