Online Exporter SAE J995 Grade 2, 5, 8 Finished Hex Nuts Wholesale to San Diego

80/20 Inc: Corner Bracket Overview

https://www.youtube.com/watch?v=QP8z9rd2SGI&feature=youtu.be

Hello, and welcome to 80/20′s Product Highlight Series. Today we’re going take a look at the corner bracket. 80’20′s corner brackets are not only easy to install but also require no machining. They come in fractional, metric, and are available across a wide range of profile series.

When using it, you have a choice. A corner bracket can be used as a stand alone fastening method, or to reinforce another fastening method. Here we can see a small sample of the corner brackets that 80/20 offers. As you can see, brackets come in a wide variety of shapes, and sizes. Making it one of the more versatile fastening methods that 80/20 offers. Now one thing you’ll want to keep in mind when using the corner bracket, is you’ll need bolt assemblies to install it. Recommended bolt assemblies for all corner brackets, can be found in the 80/20 product catalog.

Now when it comes to installing your corner bracket, the first thing you’re going to want do is preload your hardware. Preloading not only makes it easier to install your corner bracket, but also saves time during assembly. To save additional time and money, you’ll want to look for opportunities to substitute out your single T-nut for a double, or a triple T-nut like in this example. Now to get started we’ll take our corner bracket, with the preloaded hardware on it, put one last bolt and one last T-nut on it. Now when installing the T-nut it’s important to know to face the pilot hole downwards, away from the bracket.

Once we have the preloaded on there, we’ll take our first bar, and slide the bracket right onto it. Once we have that set on there, we’ll take our other bar, and slide it right onto the bracket. Once you have it set where you want it, we’ll take our wrench and tighten down. Once you have that tightened down, you have a strong, secure connection. Now hopefully you found this segment on the corner bracket helpful. For more information, visit 8020.net and make sure to subscribe to future 80/20 videos. And as always, make it a great day.

80/20 Inc: Corner Bracket Overview

https://www.youtube.com/watch?v=QP8z9rd2SGI&feature=youtu.be

RSS – GRK

https://www.richelieu.com/ca/en/category/screws-and-fasteners/other-screws/deck-screws/rugged-structural-screw/1198171

GRK’s RSS (TM) Rugged Structural Screw is made of specially hardened steel to provide you with high tensile, torque, and shear strength. The sharp threads and points bite instantly into the material (including hardwood), reducing the splitting effect due to smaller shanks.

RSS (TM) screws which are 3-1/8″ and longer have a six threaded CEE thread that enlarges the screw hole for the non-threaded portion of the fastener, allowing the wood to settle easily and increasing the screw’s drawing strength. The CEE thread also reduces the friction on the screw shank which can result in lowering the driving torque and the likelihood of splitting the wood. This is why the RSS screw is an efficient lag screw alternative.

Our round head with built-in shield (washer type head) has no sharp edges like conventional lag screws. The added shoulder (nominal diameter) underneath the washer has the ability to center the RSS screw in pre-drilled hardware like hinges and connector plates.

www.richelieu.com