SAE J995 Grade 2, 5, 8 Anamaliza Mtedza wa Hex
Kufotokozera Kwachidule:
SAE J995 Grade 2, 5, 8 Finished Hex Nuts Dimension Standard: ASME B18.2.2 Zosintha zosiyanasiyana zilipo. Inchi Kukula: 1/4”-1.1/2” Malizitsani: Plain, Black Oxide, Zinc Plated, Hot Dipped galvanized, etc. Kulongedza: Zochuluka za 25 kgs katoni iliyonse, makatoni a 36 pallet iliyonse Ubwino: High Quality, Mtengo Wopikisana, Panthawi Yake Kutumiza, Thandizo Lakatswiri, Malipoti Oyesa Zopereka Chonde khalani omasuka kuti mutiuze kuti mumve zambiri. SAE J995 SAE J995 chimakwirira zofunika makina ndi mankhwala kwa inchi mndandanda ...
Tsatanetsatane wa Zamalonda
Zolemba Zamalonda
SAE J995 Grade 2, 5, 8 Anamaliza Mtedza wa Hex
Dimension Standard: ASME B18.2.2
Zosintha zosiyanasiyana zilipo.
Inchi Kukula: 1/4"-1.1/2"
Malizitsani: Plain, Black Oxide, Zinc Plated, Hot Choviikidwa ngati malata, etc.
Kulongedza: Chochuluka pafupifupi 25 kgs katoni iliyonse, makatoni 36 aliwonse phale
Ubwino: Ubwino Wapamwamba, Mtengo Wopikisana, Kutumiza Panthawi yake, Thandizo Laukadaulo, Malipoti Oyesa Kupereka
Chonde khalani omasuka kulankhula nafe kuti mumve zambiri.
SAE J995
SAE J995 imakhudza zofunikira zamakina ndi mankhwala a mtedza wa inchi m'makalasi atatu omwe amagwiritsidwa ntchito m'mafakitale amagalimoto ndi ofanana kukula kwake mpaka 1-1 / 2" kuphatikiza. Mtedza wa SAE J995 Giredi 2, 5, ndi 8 umapezeka mosavuta mumtundu wamba wa hex.
J995 Mechanical Properties
| Gulu | Kukula mwadzina, mainchesi | Proofload, UNC ndi UN 8 Threads, psi | Rockwell Hardness |
|---|---|---|---|
| 2 | 1/4 mpaka 1-1/2 | 90,000 | Mtengo wa C32 |
| 5 | 1/4 mpaka 1 | 120,000 | Mtengo wa C32 |
| Kupitilira 1 mpaka 1-1/2 | 105,000 | Mtengo wa C32 | |
| 8 | 1/4 mpaka 5/8 | 150,000 | C24-C32 |
| Kupitilira 5/8 mpaka 1 | 150,000 | C26-C34 | |
| Kupitilira 1 mpaka 1-1/2 | 150,000 | C26-C36 | |
| *Zinthu zomwe zatchulidwazi sizigwira ntchito pa kupanikizana, zotsekera, zachifumu, mtedza wolemera kapena wokhuthala. | |||
Zofunikira za Chemical J995
| Gulu | Mpweya,% | Phosphorous,% | Manganese,% | Sulfure,% |
|---|---|---|---|---|
| 2 | 0.47 pa | 0.120 max | - | 0.15 max |
| 5 | 0.55 max | 0.050 max | 0.30 min | 0.15 max |
| 8 | 0.55 max | 0.040 kukula | 0.30 min | 0.05 max |
J995 Tensile Stress Area
| Mtengo, UNC | UNC Stress Area, mainchesi sq | Mtengo, 8TPI | 8 TPI Stress Area, mainchesi sq |
|---|---|---|---|
| 1/2-13 | 0.1419 | ||
| 5/8-11 | 0.226 | ||
| 3/4-10 | 0.334 | ||
| 7/8-9 | 0.462 | ||
| 1-8 | 0.606 | 1-8 | 0.606 |
| 1-1/8-7 | 0.763 | 1-1/8-8 | 0.790 |
| 1-1/4-7 | 0.969 | 1-1/4-8 | 1.000 |
| 1-3/8-6 | 1.155 | 1-3/8-8 | 1.233 |
| 1-1/2-6 | 1.405 | 1-1/2-8 | 1.492 |
| Kuti muwerengere kuchuluka kwa nati payokha, ingochulukitsani malo opanikizika ndi psi proofload value yoyenera. | |||
Test Lab
Msonkhano
Nyumba yosungiramo katundu
