Factory Promotional EN14399-3 and 7 System HR Structural nuts Export to Turin
Short Description:
EN14399-3 and 7 System HV Structural nuts for High-Strength Structural bolting Dimension Standard: EN14399-3 and 7 Metric Size: M12-M36 Material Grade: ISO 898-2 class 8, 10 Finish: Plain, Black Oxide, Zinc Plated, Hot Dipped Galvanized, etc. Packing: Bulk about 25 kgs each carton, 36 cartons each pallet Advantage: High Quality, Competitive Price, Timely Delivery,Technical Support, Supply Test Reports Please feel free to contact us for more details.
Product Detail
Product Tags
Factory Promotional EN14399-3 and 7 System HR Structural nuts Export to Turin Detail:
EN14399-3 and 7 System HV Structural nuts for High-Strength Structural bolting
Dimension Standard: EN14399-3 and 7
Metric Size: M12-M36
Material Grade: ISO 898-2 class 8, 10
Finish: Plain, Black Oxide, Zinc Plated, Hot Dipped Galvanized, etc.
Packing: Bulk about 25 kgs each carton, 36 cartons each pallet
Advantage: High Quality, Competitive Price, Timely Delivery,Technical Support, Supply Test Reports
Please feel free to contact us for more details.
Product detail pictures:
The key to our success is Good Products Good quality, Reasonable Value and Efficient Service for Factory Promotional EN14399-3 and 7 System HR Structural nuts Export to Turin, The product will supply to all over the world, such as: Jakarta, Cape Town, South Africa, Many kinds of different products are available for you to choose, you can do one-stop shopping here. And customized orders are acceptable. Real business is to get win-win situation, if possible, we would like to provide more support for customers. Welcome all nice buyers communicate details of products with us!!
“This video is copyrighted material of Nissan North America, Inc. and should not be copied, edited, or reproduced without the permission of Nissan.
For information please visit https://owners.Nissanusa.com/nowners/. You will find quick reference guides and other useful information about your warranty, Bluetooth® system, and much more!
The normal charging function is performed using a charger installed in your home that is hard-wired into a dedicated circuit, Electric Vehicle Supply Equipment (EVSE) (if so equipped) or a SAE J1772 compliant cord set to connect the vehicle to a dedicated AC 220-240 volt circuit. Depending on your vehicle equipment, your charging time may vary.
If your vehicle is equipped with a quick charge function, you will use THIS port on the right for normal charging.
To begin normal charging:
● Ensure that the vehicle is in park,
● Apply the parking brake and place the power switch in the OFF position,
● Unlock the charge port and then open it by sliding your hand under the lid and raising it until it locks in place,
● Open the charge port cap, then
● Plug the charge connector into the charge port on your vehicle.
When it is properly connected, a beep will sound once. If charging has started or if the battery is waiting for a preset charging timer, a beep will sound twice and the charging status indicator light display will change.
Charging will not start if the vehicle is ON. However, charging will continue if the vehicle is turned ON during charging operations.
To stop charging, ensure that the charge connector lock is not engaged. Press the button on the charge connector, release the lock and then remove the charge connector from the port. Close the cap on the charge port and then close the charge port lid. Make sure to properly store the charge connector when not in use.
Normal charging can be used with the immediate charge, remote charge and charge timer functions.
Please see your Owner’s Manual for important safety information, system limitations, and additional operating and feature information. “
Remove the u-bolts in order to get the drive shaft out, removing it from the rear pinion without breaking the nuts; learn how in this free auto-restoration video.
