Factory Cheap price DIN 74361-H Flat Collar Nuts Wheel Nuts with Washers to Mauritius Factory
Short Description:
DIN 74361-H Flat Collar Nuts Wheel Nuts for Heavy Truck and Bus Standard: DIN 74361-H Metric Size: M12-M22 Material Grade: Carbon Steel, Alloy Steel, covers grade ISO 898-2 class 10, 12 Finish: Plain, Black Oxide, Zinc Plated, Hop Dipped Galvanized, Dacromet, etc. Packing: Bulk about 25 kgs each carton, 36 cartons each pallet Advantage: High Quality and Strict Quality Control, Competitive Price,Timely Delivery; Technical Support, Supply Test Reports Please feel free to contact us for more det...
Product Detail
Product Tags
Factory Cheap price DIN 74361-H Flat Collar Nuts Wheel Nuts with Washers to Mauritius Factory Detail:
DIN 74361-H Flat Collar Nuts Wheel Nuts for Heavy Truck and Bus
Standard: DIN 74361-H
Metric Size: M12-M22
Material Grade: Carbon Steel, Alloy Steel, covers grade ISO 898-2 class 10, 12
Finish: Plain, Black Oxide, Zinc Plated, Hop Dipped Galvanized, Dacromet, etc.
Packing: Bulk about 25 kgs each carton, 36 cartons each pallet
Advantage: High Quality and Strict Quality Control, Competitive Price,Timely Delivery; Technical Support, Supply Test Reports
Please feel free to contact us for more details.
Product detail pictures:
Quality first, Honesty as base, Sincere service and mutual profit is our idea, in order to develop continuously and pursue the excellence for Factory Cheap price DIN 74361-H Flat Collar Nuts Wheel Nuts with Washers to Mauritius Factory, The product will supply to all over the world, such as: Dominica, Nigeria, Belize, By integrating manufacturing with foreign trade sectors, we can offer total customer solutions by guaranteeing the delivery of right items to the right place at the right time, which is supported by our abundant experiences, powerful production capability, consistent quality, diversified product portfolios and the control of the industry trend as well as our mature before and after sales services. We'd like to share our ideas with you and welcome your comments and questions.
Descarga MP3: – https://illbehonest.com/espanol/Evidencias-de-Una-Verdadera-Conversion-Paul-Washer
I’ll Be Honest en Espanol
illbehonest.com/espanol
FIEIDE, Cordoba, El Matrimonio – El Ministerio Principal.
Paul Washer de HeartCry Missionary Society – heartcrymissionary.com
If your original lug bolts on your Exige or Elise are stuck and you keep shearing the 10 point adapter tool, you will be faced with the decision to drill them out for removal. What is happening is the surface between the cone of the bolt and the wheel is where it is stuck, it is not the bolt thread to the hub threads. The trick here is to just use a 3/8 inch Cobalt drill bit with some PB Blaster Penetrant oil around the lug bolt and on the drilling surface and go to a depth just there the threads (on the lug bolt) start. This will allow you to use a maximum of 175 lb-feet of torque to loosen the bolt. Do not go much above 200 lb-feet of torque with the Evora adapter tool (don’t use the stock Elise or Exige tool) otherwise it will shear. This drill out procedure essentially collapses the surface around the cone and allows the surfaces to break loose or detach. Do not worry about being exactly centered, but try to be as close as possible and always check your progress with a depth gauge and light. Note that the stock 10 point lug bolts are made of a non hardend steel so Cobalt 3/8 drill bit can cut through it relatively easily. The Socket Wrench used is actually a 14 inch (in length) unit, half inch drive with a 17 mm socket. No breaker bar was used so this limited the amount of torque applied to the Lotus adapter tool….which is also made out of non-hardened steel. Very weak design.
