Factory Cheap Hot ASTM A320 L7 Heavy Hex Bolts to New Zealand Factory
Short Description:
ASTM A320 L7 A193 B7 Dual Certified Heavy Hex Bolts Standard: ASME/ANSI B18.2.1, ASME/ANSI B18.2.3.7M Various types of head are also available Inch Size: 1/2”-2.3/4” with various lengths Metric Size: 1/2-M72 with various lengths Grade: ASTM A320 L7, ASTM A193 B7 Finish: Black Oxide, Zinc Plated, Zinc Nickel Plated, PTFE etc. Packing: Bulk about 25 kgs each carton, 36 cartons each pallet Advantage: High Quality and Strict Quality Control, Competitive Price,Timely Delivery; Technical Support, S...
Product Detail
Product Tags
Factory Cheap Hot ASTM A320 L7 Heavy Hex Bolts to New Zealand Factory Detail:
ASTM A320 L7 A193 B7 Dual Certified Heavy Hex Bolts
Standard: ASME/ANSI B18.2.1, ASME/ANSI B18.2.3.7M Various types of head are also available
Inch Size: 1/2”-2.3/4” with various lengths
Metric Size: 1/2-M72 with various lengths
Grade: ASTM A320 L7, ASTM A193 B7
Finish: Black Oxide, Zinc Plated, Zinc Nickel Plated, PTFE etc.
Packing: Bulk about 25 kgs each carton, 36 cartons each pallet
Advantage: High Quality and Strict Quality Control, Competitive Price,Timely Delivery; Technical Support, Supply Test Reports
Please feel free to contact us for more details.
Product detail pictures:
Sticking to the perception of Creating products of top of the range and earning mates with people today from all over the world, we constantly put the desire of consumers in the first place for Factory Cheap Hot ASTM A320 L7 Heavy Hex Bolts to New Zealand Factory, The product will supply to all over the world, such as: Germany, Adelaide, Puerto Rico, All these products are manufactured in our factory located in China. So we can guarantee our quality seriously and availably. Within these four years we sell not only our products but also our service to clients throughout the world.
Iranian Army Bell 214 ‘Big Lifter’. Builder/pilot – Rob Leigh.
The mechanics in this model are over 30 years old and it has undergone numerous transformations over the years. It started life around 1978 and was purchased from Dave Neiman models as a UH-1B Huey ‘Iroquois’ in kit form from Hirobo. Utilising a 45 size IC engine, it performed well until a light crash prompted my father to upgrade the head to the MkII, extend the blades, upgrade the power plant to an OS 61 FSH and with the purchase of a new Bell 214 Fuselage, it was transformed into a ‘HeliSwiss’ rescue Helicopter. This was flown for a few years, until she was retired to the loft. In January of 2011, I decided it would be nice to get ‘the old bird’ back in the air. I completely stripped her down to the last nut & bolt and rebuilt from the ground up.
After approx. 400 hours and around seven months she was finally flight ready. She was started for her initial test and it was soon apparent that due to the extra ‘scale’ weight generated by the cockpit, paint and extra detailing. The old ‘OS’ was not going to be able to sustain her in the air, without overheating!
In this latest re-incarnation, she has now been converted to electric power, utilising the original mechanics, exhaust holes filled and re-sprayed and keeping the original clutch. This gives an authentic sounding spool up, which was the hope with this new design. The heli sports a Scorpion 4035 400KV motor, with a Hawk 120Amp High Voltage speed controller.
It is running 2 x 6S 2600MaH packs.
My ratio is 10:1 and this gives a head speed of around 1200rpm, although the KV/Cell count is a little too high, as I am only running the throttle curve at about 35%. Ideally it should be around 80% for maximum efficiency.
I perhaps should have gone for a 330KV motor and ran it on 10S, as opposed to 12S. Running as above though, the packs, motor & speed controller barely get warm, so it’s not really a problem. The choice of using 2 x 6S packs was because I have a T-Rex 500 using the said packs, and I wanted to be able to use the same ones. I probably could have gotten away with a 4025 Scorpion motor as well, as it’s got loads of power. But it was difficult to know as it was a bit of an unknown quantity.
Rob.
