DIN125A Flat Washers Price - Nylon Patch Socket Set Screws – Dingshen Metalworks
Short Description:
Nylon Patch Socket Set Screws Metric Size: M1.4-M52, Inch Size: 0# – 2″ Various Drive and Point Types Various Surface Finishes Other Material Grades are available Please feel free to contact us for more details
Product Detail
Product Tags
DIN125A Flat Washers Price - Nylon Patch Socket Set Screws – Dingshen Metalworks Detail:
Nylon Patch Socket Set Screws
Metric Size: M1.4-M52, Inch Size: 0# – 2″
Various Drive and Point Types
Various Surface Finishes
Other Material Grades are available
Please feel free to contact us for more details
Product detail pictures:
Fast and great quotations, informed advisers to help you choose the correct product that suits all your preferences, a short creation time, responsible top quality control and different services for paying and shipping affairs for DIN125A Flat Washers Price - Nylon Patch Socket Set Screws – Dingshen Metalworks, The product will supply to all over the world, such as: Holland, Argentina, Costa Rica, Our mission is to deliver consistently superior value to our customers and their clients. This commitment permeates everything we do, driving us to continuously develop and improve our products and the processes to fulfill your needs.
If your original lug bolts on your Exige or Elise are stuck and you keep shearing the 10 point adapter tool, you will be faced with the decision to drill them out for removal. What is happening is the surface between the cone of the bolt and the wheel is where it is stuck, it is not the bolt thread to the hub threads. The trick here is to just use a 3/8 inch Cobalt drill bit with some PB Blaster Penetrant oil around the lug bolt and on the drilling surface and go to a depth just there the threads (on the lug bolt) start. This will allow you to use a maximum of 175 lb-feet of torque to loosen the bolt. Do not go much above 200 lb-feet of torque with the Evora adapter tool (don’t use the stock Elise or Exige tool) otherwise it will shear. This drill out procedure essentially collapses the surface around the cone and allows the surfaces to break loose or detach. Do not worry about being exactly centered, but try to be as close as possible and always check your progress with a depth gauge and light. Note that the stock 10 point lug bolts are made of a non hardend steel so Cobalt 3/8 drill bit can cut through it relatively easily. The Socket Wrench used is actually a 14 inch (in length) unit, half inch drive with a 17 mm socket. No breaker bar was used so this limited the amount of torque applied to the Lotus adapter tool….which is also made out of non-hardened steel. Very weak design.
Embedment Depth, Ultimate Tensile Load, Recommended Pullout Loads.
Ask us for manuals or assistance in these areas.
For more grouting information visit https://www.techmargrout.com/
For a guide on how to grout Rotating Equipment visit https://www.techmargrout.com/technical/
Ask about live grout training (much more exciting and modern than these videos) or consulting! Info at https://www.techmargrout.com/services/
