ASTM A563 Grade C Heavy Hex Nuts
Short Description:
ASTM A563 Grade C Heavy Hex Nuts Dimension Standard: ASME B18.2.2 Inch Size: 1/4”-4” Other Available Material Grade: ASTM A563 A, B, C, D, DH and so on. Finish: Plain, Black Oxide, Zinc Plated, Hot Dipped Galvanized, etc. Packing: Bulk about 25 kgs each carton, 36 cartons each pallet Advantage: High Quality, Competitive Price, Timely Delivery,Technical Support, Supply Test Reports Please feel free to contact us for more details. ASTM A563 The ASTM A563 specification covers the chemical and me...
Product Detail
Product Tags
ASTM A563 Grade C Heavy Hex Nuts
Dimension Standard: ASME B18.2.2
Inch Size: 1/4”-4”
Other Available Material Grade:
ASTM A563 A, B, C, D, DH and so on.
Finish: Plain, Black Oxide, Zinc Plated, Hot Dipped Galvanized, etc.
Packing: Bulk about 25 kgs each carton, 36 cartons each pallet
Advantage: High Quality, Competitive Price, Timely Delivery,Technical Support, Supply Test Reports
Please feel free to contact us for more details.
ASTM A563
The ASTM A563 specification covers the chemical and mechanical requirements for carbon and alloy steel nuts used on bolts, studs, and externally threaded fasteners. The charts below address over tapping allowances for hot-dip galvanized nuts, grade marking requirements, and mechanical requirements.
According to the A563 specification, “The requirements for any grade of nut may, at the supplier’s option, and with notice to the purchaser, be fulfilled by furnishing nuts of one of the stronger grades specified herein unless such a substitution is barred in the inquiry and purchase order”. This is important because some nut grades are not readily available in certain sizes and finishes. Additionally, the specification allows for the substitution of ASTM A194 grade 2H nuts in lieu of A563 grade DH nuts due to the lack of availability of grade DH nuts in nominal sizes 3/4″ and larger.
Hot-dip galvanized nuts must be tapped oversize to allow for the added thickness of the zinc on the threads of the externally threaded fastener. These allowances are addressed in the chart below.
Various nut styles exist and to some degree are determined by their grade. These styles include hex, heavy hex, square, jam, coupling, and sleeve.
A563 Grades
| A | Carbon steel, hex or heavy hex |
|---|---|
| B | Carbon steel, hex or heavy hex |
| C | Carbon steel, quenched and tempered, heavy hex |
| D | Carbon steel, quenched and tempered, heavy hex |
| DH | Carbon steel, quenched and tempered, heavy hex |
| C3 | Weathering steel, quenched and tempered, heavy hex |
| DH3 | Weathering steel, quenched and tempered, heavy hex |
A563 Mechanical Properties
| Grade | Style | Size, in. | Proof Load, ksi | Hardness, HBN | |
|---|---|---|---|---|---|
| Plain | Galvanized | ||||
| A | Hex | 1/4 – 1-1/2 | 90 | 68 | 116 – 302 |
| Heavy Hex | 1/4 – 4 | 100 | 75 | 116 – 302 | |
| B | Heavy Hex | 1/4 – 1 | 133 | 100 | 121 – 302 |
| Heavy Hex | 1-1/8 – 1-1/2 | 116 | 87 | 121 – 302 | |
| C / C3 | Heavy Hex | 1/4 – 4 | 144 | 144 | 143 – 352 |
| D | Heavy Hex | 1/4 – 4 | 150 | 150 | 248 – 352 |
| DH / DH3 | Heavy Hex | 1/4 – 4 | 175 | 150 | 248 – 352 |
| For UNC, 8UN, 6UN, and Coarse Pitch Threads | |||||
A563 Chemical Properties
| Element | Grades O, A, B, C | D** | DH** |
|---|---|---|---|
| Carbon | 0.55% max | 0.55% max | 0.20 – 0.55% |
| Manganese, min | 0.30% | 0.60% | |
| Phosphorus, max | 0.12% | 0.04% | 0.04% |
| Sulfur, max | 0.15%* | 0.05% | 0.05% |
| * For grades O, A and B a sulfur content of 0.23% max is acceptable with the purchasers approval | |||
| ** For grades D and DH a sulfur content of 0.05 – 0.15% is acceptable provided the manganese is 1.35% min | |||
| Element | Classes for Grade C3* | DH3 | ||||||
|---|---|---|---|---|---|---|---|---|
| A | B | C | D | E | F | N | ||
| Carbon | 0.33 – 0.40% | 0.38 – 0.48% | 0.15 – 0.25% | 0.15 – 0.25% | 0.20 – 0.25% | 0.20 – 0.25% | 0.20 – 0.53% | |
| Manganese | 0.90 – 1.20% | 0.70 – 0.90% | 0.80 – 1.35% | 0.40 – 1.20% | 0.60 – 1.00% | 0.90 – 1.20% | 0.40% min | |
| Phosphorus | 0.040% max | 0.06 – 0.12% | 0.035% max | 0.040% max | 0.040% max | 0.040% max | 0.07 – 0.15% | 0.046% max |
| Sulfur, max | 0.050% | 0.050% | 0.040% | 0.050% | 0.040% | 0.040% | 0.050% | 0.050% |
| Silicon | 0.15 – 0.35% | 0.30 – 0.50% | 0.15 – 0.35% | 0.25 – 0.50% | 0.15 – 0.35% | 0.15 – 0.35% | 0.20 – 0.90% | |
| Copper | 0.25 – 0.45% | 0.20 – 0.40% | 0.20 – 0.50% | 0.30 – 0.50% | 0.30 – 0.60% | 0.20 – 0.40% | 0.25 – 0.55% | 0.20% min |
| Nickel | 0.25 – 0.45% | 0.50 – 0.80% | 0.25 – 0.50% | 0.50 – 0.80% | 0.30 – 0.60% | 0.20 – 0.40% | 1.00% max | 0.20% min** |
| Chromium | 0.45 – 0.65% | 0.50 – 0.75% | 0.30 – 0.50% | 0.50 – 1.00% | 0.60 – 0.90% | 0.45 – 0.65% | 0.30 – 1.25% | 0.45% min |
| Vanadium | 0.020% min | |||||||
| Molybdenum | 0.06% max | 0.10% max | 0.15% min** | |||||
| Titanium | 0.05% max | |||||||
| * Selection of a class shall be at the option of the manufacturer | ||||||||
| ** Nickel or Molybdenum may be used. | ||||||||
A563 Grade Identification Markings
| Grade Identification Marking | Specification | Material | Nominal Size, In. | Proof Load Stress, ksi | Hardness Rockwell | See Note | |
|---|---|---|---|---|---|---|---|
| Min | Max | ||||||
 |
ASTM A563 Grade O | Carbon Steel | 1/4 – 1-1/2 | 69 | B55 | C32 | 2,3 |
| ASTM A563 Grade A | Carbon Steel | 1/4 – 1-1/2 | 90 | B68 | C32 | 2,3 | |
| ASTM A563 Grade B | Carbon Steel | 1/4 – 1 | 120 | B69 | C32 | 2,3 | |
| >1 – 1-1/2 | 105 | ||||||
 |
ASTM A563 Grade C | Carbon Steel, may be Quenched and Tempered | 1/4 – 4 | 144 | B78 | C38 | 4 |
 |
ASTM A563 Grade C3 | Atmospheric Corrosion Resistant Steel, may be Quenched and Tempered | 1/4 – 4 | 144 | B78 | 38 | 4,6 |
 |
ASTM A563 Grade D | Carbon Steel, may be Quenched and Tempered | 1/4 – 4 | 150 | B84 | C38 | 5 |
 |
ASTM A563 Grade DH | Carbon Steel, Quenched and Tempered | 1/4 – 4 | 175 | C24 | C38 | 5 |
 |
ASTM A563 Grade DH3 | Atmospheric Corrosion Resistant Steel, Quenched and Tempered | 1/4 – 4 | 175 | C24 | C38 | 4,6 |
|
NOTES: 1.In addition to the indicated grade marking, all grades, except A563 grades O, A, and B, must be marked for manufacturer identification. 2.Nuts are not required to be marked unless specified by the purchaser. When marked, the identification marking shall be the grade letter O, A, or B. 3.Properties shown are those of nonplated or noncoated coarse thread nuts. 4.Properties shown are those of coarse thread heavy hex nuts. 5.Properties shown are those of coarse thread heavy hex nuts. Other nuts styles and fine threads may apply. 6.The nut manufacturer, at his option, may add other markings to indicate the use of atmospheric corrosion resistant steel. Inch Fastener Standards. 7th ed. Cleveland: Industrial Fasteners Institute, 2003. n-80-n-81. |
|||||||
Thread Dimensions and Oversizing Allowances
For Nuts: Hot Dipped Galvanized per Specification F2329
| Nominal Nut Size, in. and Pitch | Diametral Allowance, in. | Pitch Diameter | |
|---|---|---|---|
| Min | Max | ||
| 0.250 – 20 | 0.016 | 0.2335 | 0.2384 |
| 0.312 – 18 | 0.017 | 0.2934 | 0.2987 |
| 0.375 – 16 | 0.017 | 0.3514 | 0.3571 |
| 0.437 – 14 | 0.018 | 0.4091 | 0.4152 |
| 0.500 – 13 | 0.018 | 0.4680 | 0.4745 |
| 0.562 – 12 | 0.020 | 0.5284 | 0.5352 |
| 0.625 – 11 | 0.020 | 0.5860 | 0.5932 |
| 0.750 – 10 | 0.020 | 0.7050 | 0.7127 |
| 0.875 – 9 | 0.022 | 0.8248 | 0.8330 |
| 1.000 – 8 | 0.024 | 0.9428 | 0.9516 |
| 1.125 – 8 | 0.024 | 1.0678 | 1.0768 |
| 1.125 – 7 | 0.024 | 1.0562 | 1.0656 |
| 1.250 – 8 | 0.024 | 1.1928 | 1.2020 |
| 1.250 – 7 | 0.024 | 1.1812 | 1.1908 |
| 1.375 – 8 | 0.027 | 1.3208 | 1.3301 |
| 1.375 – 6 | 0.027 | 1.2937 | 1.3041 |
| 1.500 – 8 | 0.027 | 1.4458 | 1.4553 |
| 1.500 – 6 | 0.027 | 1.4187 | 1.4292 |
| 1.750 – 5 | 0.050 | 1.6701 | 1.6817 |
| 2.000 – 4.5 | 0.050 | 1.9057 | 1.9181 |
| 2.250 – 4.5 | 0.050 | 2.1557 | 2.1683 |
| 2.500 – 4 | 0.050 | 2.3876 | 2.4011 |
| 2.750 – 4 | 0.050 | 2.6376 | 2.6513 |
| 3.000 – 4 | 0.050 | 2.8876 | 2.9015 |
| 3.250 – 4 | 0.050 | 3.1376 | 3.1517 |
| 3.500 – 4 | 0.050 | 3.3876 | 3.4019 |
| 3.750 – 4 | 0.050 | 3.6376 | 3.6521 |
| 4.000 – 4 | 0.050 | 3.8876 | 3.9023 |
| Inch Fastener Standards. 7th ed. Cleveland: Industrial Fasteners Institute, 2003. B-173. | |||
Testing Lab
Workshop
Warehouse
