ASTM A194 2HM Heavy Hex Nuts

ASTM A194/A194M 2HM Heavy Hex Nuts

API 6A Flange Valve Wellhead Heavy Hex Nuts

Dimension Standard: ASME B18.2.2, ASME B18.2.4.6M, ISO 4033, Din934 H=D

Inch Size: 1/4”-4”

Metric Size: M6-M100

Other Available Grade:

ASTM A194/A194M 2H, 2HM, 4, 4L, 7, 7L, 7M, 8, 8M, 16 and so on.

Finish: Plain, Black Oxide, Zinc Plated, Zinc Nickel Plated, Cadmium Plated, PTFE etc.

Packing: Bulk about 25 kgs each carton, 36 cartons each pallet

Advantage: High Quality, Competitive Price, Timely Delivery,Technical Support, Supply Test Reports

Please feel free to contact us for more details.

ASTM A194

The ASTM A194 specification covers carbon, alloy and stainless steel nuts intended for use in high-pressure and/or high-temperature service. Unless otherwise specified, the American National Standard Heavy Hex Series (ANSI B 18.2.2) shall be used. Nuts up to and including 1 inch nominal size shall be UNC Series Class  2B fit. Nuts over 1 inch nominal size shall be either UNC Series Class 2B fit or 8 UN Series Class 2B fit. High strength ASTM A194 grade 2H nuts are common in the marketplace and are often substituted for ASTM A563 grade DH nuts due to the limited availability of DH nuts in certain diameters and finishes.
Grades

Mechanical Properties Grade Identification Markings

Grade Identification Marking5	Specification	Material	Nominal Size, In.	Tempering Temp. °F	Proof Load Stress, ksi	Hardness Rockwell		See Note
						Min	Max
	ASTM A194 Grade 2	Medium Carbon Steel	1/4 – 4	1000	150	159	352	1,2,3
	ASTM A194 Grade 2H	Medium Carbon Steel, Quenched and Tempered	1/4 – 4	1000	175	C24	C38	1,2
	ASTM A194 Grade 2HM	Medium Carbon Steel, Quenched and Tempered	1/4 – 4	1000	150	159	237	1,2,3
	ASTM A194 Grade 4	Medium Carbon Alloy Steel, Quenched and Tempered	1/4 – 4	1100	175	C24	C38	1,2
	ASTM A194 Grade 7	Medium Carbon Alloy Steel, Quenched and Tempered	1/4 – 4	1100	175	C24	C38	1,2
	ASTM A194 Grade 7M	Medium Carbon Alloy Steel, Quenched and Tempered	1/4 – 4	1100	150	159	237	1,2,3
	ASTM A194 Grade 8	Stainless AISI 304	1/4 – 4	-	80	126	300	4
	ASTM A194 Grade 8M	Stainless AISI 316	1/4 – 4	-	80	126	300	4
NOTES: 1. The markings shown for all grades of A194 nuts are for cold formed and hot forged nuts. When nuts are machined from bar stock, the nut must additionally be marked with the letter ‘B’. The letters H and M indicate heat treated nuts. 2. Properties shown are those of coarse and 8-pitch thread heavy hex nuts. 3. Hardness numbers are Brinell Hardness. 4. Nuts that are carbide-solution treated require additional letter A – 8A or 8MA. 5. All nuts shall bear the manufacturer’s identification mark. Nuts shall be legibly marked on one face to indicate the grade and process of the manufacturer. Marking of wrench flats or bearing surfaces is not permitted unless agreed upon between manufacturer and purchaser. Nuts coated with zinc have an asterisk (*) marked after the grade symbol. Nuts coated with cadmium shall have a plus sign (+) marked after the grade symbol. 6. Other less common grades exist, but are not listed here.                                            Inch Fastener Standards. 7th ed. Cleveland: Industrial Fasteners Institute, 2003. N-80 – N-81.

Chemical Properties

Testing Lab

Workshop

Warehouse